C95300 - Copper Alloys

Equivalent Specifications

STM B148 C95300
ASTM B271 C95300
BS EN 1982-2008 GC CC330G
CuAl9-C
SAE J461
SAE 68b

Key Features

Good strength, wear and corrosion resistant.

Alloy is heat treatable.

Typical Uses

Gears, worm wheels, valve guides and seats and structural applications.

Electrical: Connectors

Fasteners: Stripped Nuts

Industrial: Welding Jaws, Pickling Hooks, High Strength Clamps, Valve Bodies, Pickling Baskets, Bearing Segment for the Steel Industry, Large Hold Down Screws, Pressure Blocks for the Steel Industry, Gears, Cams, High Temperature Applications, Mining Machine Parts

Marine: Covers for Marine Hardware, Marine Equipment.

Description	Aluminium Bronze
Nominal Composition	CuAl10Fe
Alloy Type	cast

Typical Mechanical Properties

Tensile Strength (N/mm²)	490
Proof/Yield Strength (N/mm²)	180
Elongation (%)	25
Hardness Brinell	140
Impact Izod J20°C

Typical Physical Properties

Density g/cm³	7.53
Melting Temperature Range °C	1040 - 1045
Thermal Conductivity W/mK
Electrical Resistivity μΩ.m15°C
Coefficient of Thermal Expansion 0-250°C
Relative Magnetic Permeability
Coefficient of Friction

Copper Alloys has the ability to modify existing alloys for improved performance. Many customers have benefited from this in the past.

To discuss your requirements, call a member of Copper Alloys’s technical team on +44 (0) 1782-816888, or email [email protected].

This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with tempeter, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose.

Any advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company’s Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions, a copy of which is available on request.